Monel K500 Round Bar

Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.

This nickel alloy is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on the surface of the material during processing. Aluminum and copper may be selectively oxidized during heating, leaving a magnetic nickel rich film on the outside. Pickling or  Monel K-500 Barsbright dipping in acid can remove this magnetic film and restore the non-magnetic properties.

Manufacturer, Exporter and Supplier of Monel Round Bars in India

Monel K500 Round Bar

Monel K500 Rod

Monel K500 Wire

Monel K500 Bright Bar

Monel K500 Forged Bar

Monel K500 Square Bar

Monel K500 Hex Bar

Monel K500 Hollow Bar

Monel K500 Threaded Bar

Monel K500 Billet

Monel K500 is available in all forms as per the Clients Requirement.

Note: 

1. Rates are subject to change as per Daily market situation.

2. Rates given above are an approximate market rates and will be valid only after formal discussion and 100% payment in advance.

3. Payment 100% in advance by RTGS/NEFT.