Incoloy Products

Incoloy 800 / UNS N08800 / Alloy 800 / 1.4876 Flanges Manufacturer in India

Incoloy 800 / UNS N08800 / Alloy 800 / 1.4876 Flanges Exporter in India

Size Range: 1/2" to 24"

Class / Rating: 150 LB, 300 LB, 600 LB, 900 LB, 1500 LB and 2500 LB, PN 6, PN 10, PN 16, PN 25, PN 40, PN 64

Chemical Composition - Incoloy 800:

Nickel (Ni) = 30.00 to 35.00

Chromium (Cr) = 19.00 to 23.00

Iron (Fe) = 39.50 Min

Carbon (C) =  0.10 Max

Aluminium (Al) = 0.15 to 0.60

Titanium (Ti) = 0.15 to 0.60

Aluminium (Al) + Titanium (Ti) = 0.30 to 1.20

Incoloy 800 Slip On Flange

Incoloy 800 Blind Flange

Incoloy 800 Weld Neck Flange

Incoloy 800 Socket Weld Flange

Incoloy 800 Long Weld Neck Flange

Incoloy 800 Lapped Joint Flange

Incoloy 800 Ring Type Joint Flange

Incoloy 800 Orifice Flange

Incoloy 800 Spectacle Flange

Incoloy 800 Reducing Flange

Incoloy 800 Customised Flange

Application:

Heat exchangers and process piping, carburizing fixtures and retorts, furnace components, electric range heating-element sheathing, extruded tubing for ethylene and steam methane reforming furnaces, ammonia effluent coolers, Valves, fittings and other components exposed to corrosive attack from 1100-1800° F, Chemical and petrochemical processing, etc.

Note: 

1. Rates are subject to change as per Daily market situation.

2. Rates given above are an approximate market rates and will be valid only after formal discussion and 100% payment in advance.

3. Payment 100% in advance by RTGS/NEFT.

Incoloy 800, 800H, and 800HT are iron-nickel-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT. Incoloy 800 was the first of these alloys and it was slightly modified into Incoloy 800H. This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Incoloy 800HT has further modifications to the combined titanium and aluminum levels (.85-1.20%) to ensure optimum high temperature properties. The nickel alloy is dual certified (800H/HT) and combines the properties of both forms. Incoloy 800H/HT alloy was intended for high temperature structural applications. The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase. The general corrosion resistance is excellent. In the solution annealed condition, alloys 800H and 800HT have superior creep and stress rupture properties.

Manufacturer, Exporter and Supplier of Incoloy Round Bars in India

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Round Bar

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Rod

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Wire

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Bright Bar

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Forged Bar

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Square Bar

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Hex Bar

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Hollow Bar

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Threaded Bar

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Billet

Application:

Heat exchangers and process piping, carburizing fixtures and retorts, furnace components, electric range heating-element sheathing, extruded tubing for ethylene and steam methane reforming furnaces, ammonia effluent coolers, Valves, fittings and other components exposed to corrosive attack from 1100-1800° F, Chemical and petrochemical processing, etc.

Note: 

1. Rates are subject to change as per Daily market situation.

2. Rates given above are an approximate market rates and will be valid only after formal discussion and 100% payment in advance.

3. Payment 100% in advance by RTGS/NEFT.

Incoloy 825 / UNS N08825 / Alloy 825 / 2.4858 Flanges Manufacturer in India

Incoloy 825 / UNS N08825 / Alloy 825 / 2.4858 Flanges Exporter in India

Size Range: 1/2" to 24"

Class / Rating: 150 LB, 300 LB, 600 LB, 900 LB, 1500 LB and 2500 LB, PN 6, PN 10, PN 16, PN 25, PN 40, PN 64

Chemical Composition - Incoloy 825:

Nickel (Ni) = 38.00 to 46.00

Chromium (Cr) = 19.50 to 23.50

Iron (Fe) = 22.00 Min

Molybdenum (Mo) = 2.50 to 3.50

Copper (Cu) = 1.50 to 3.00

Carbon (C) =  0.05 Max

Manganese (Mn) = 1.00 Max

Sulfur (S) = 0.03 Max

Silicon (Si) = 0.50 Max

Aluminium (Al) = 0.20 Max

Titanium (Ti) = 0.60 to 1.20

Incoloy 825 Slip On Flange

Incoloy 825 Blind Flange

Incoloy 825 Weld Neck Flange

Incoloy 825 Socket Weld Flange

Incoloy 825 Long Weld Neck Flange

Incoloy 825 Lapped Joint Flange

Incoloy 825 Ring Type Joint Flange

Incoloy 825 Orifice Flange

Incoloy 825 Spectacle Flange

Incoloy 825 Reducing Flange

Incoloy 825 Customised Flange

Application:

Chemical processing components, pollution control, oil and gas recovery,pickling tank parts, nuclear fuel processing, Acid production, Marine exhaust systems, etc.

Note: 

1. Rates are subject to change as per Daily market situation.

2. Rates given above are an approximate market rates and will be valid only after formal discussion and 100% payment in advance.

3. Payment 100% in advance by RTGS/NEFT.

Incoloy 825 is a nickel-iron-chromium alloy with additions of molybdenum and copper. This nickel steel alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. It is similar to alloy 800 but has improved resistance to aqueous corrosion. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized attack such as pitting and crevice corrosion.

Alloy 825 is especially resistant to sulfuric and phosphoric acids.

Manufacturer, Exporter and Supplier of Incoloy Round Bars in India

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Round Bar

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Rod

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Wire

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Bright Bar

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Forged Bar

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Square Bar

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Hex Bar

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Hollow Bar

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Threaded Bar

Incoloy 800, Incoloy 800H, Incoloy 800 HT, Incoloy 825 Billet

Application:

chemical processing components, pollution-control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production, and pickling equipment, Marine exhaust systems, etc

Note: 

1. Rates are subject to change as per Daily market situation.

2. Rates given above are an approximate market rates and will be valid only after formal discussion and 100% payment in advance.

3. Payment 100% in advance by RTGS/NEFT.

Nakoda Industrial Products Are The Leading Preparer Of High Integrity Incoloy 800, Incoloy 800h, Incoloy 800 Ht And Incoloy 825 Fasteners.

We can provide a wide variety of INCOLOY FASTENERS.

If we do not have incoloy nuts or bolts in stock then we can have these manufactured to your specification.

Incoloy 800 / Incoloy 825 Fasteners

Incoloy 800 / Incoloy 825 Bolts

Incoloy 800 / Incoloy 825 Screws

Incoloy 800 / Incoloy 825 Nuts

Incoloy 800 / Incoloy 825 Washers

Incoloy 800 / Incoloy 825 Fasteners Manufacturers and Supplier In India and Gulf Countries.

UNS N08810 / UNS N08811 / UNS N08825 Fasteners are available in Ready Stock and at Best Prices.

Incoloy 800 / Incoloy 825 Bolts available at Nakoda Industrial Product:

Hex Head Bolt, Stud Bolt, Socket Cap Screw, Flange Bolt, Carriage Bolt, Elevator Bolt, Lag Bolt, Stove Bolt, Tap Bolt, Grub Screw, Set Screw, Shoulder Bolt, Anchor Bolt, Eye Bolt, Plow Bolt, Draw Bolt, Hanger Bolt, Step Bolt, U Bolt, J Bolt.

Incoloy 800 / Incoloy 825 Nuts available at Nakoda Industrial Product:

Hex Nut, Hex Heavy Nut, Cap Nut, Coupling Nut, Square Nut, Castle Nut, Flex Lock Nut, High Nut, K Lock Nut, Serrated Flange Nut, 2 Way Lock Nut, Acron Nut, Wing Nut, Jam Nut, T Nut.

Incoloy 800 / Incoloy 825 Washers available at Nakoda Industrial Product:

Plain Washer, Flat Washer, Spring Washer, Dome Washer, Hex Washer, Square Washer, Hexagonal Washer, Lock Washer, Split Washer, Dome Tooth Washer, Tooth Lock Washer.

Incoloy 800 / Incoloy 825 Screws available at Nakoda Industrial Product:

Self Drilling Screw, Machine Screw, Practicle Board Screw, Self Tapering Screw, Concrete Screw, Clipboard Screw, Thread Rolling Screw, Roofing Screw, Construction Screw, Tread Cutting Screw, Drywall Screw, Lag Screw, Wood Screw, Euro Screw, Furniture Screw, Cap Screw.

Note: 

1. Rates are subject to change as per Daily market situation.

2. Rates given above are an approximate market rates and will be valid only after formal discussion and 100% payment in advance.

3. Payment 100% in advance by RTGS/NEFT.

Product Description:

With the aid of skilled professionals, we are engrossed in offering high quality Incoloy Fittings on large scale in all the Incoloy Grades. We offer them in in Pipe Fittings and are highly applauded for its long service life, durability and optimum results. These fittings are customizable and are being provided in the affordable rates to the patrons. Precisely fabricate our vendors well-equipped production unit using optimum quality material, these tubes are available at market leading rates.

Features:

Crack resistant

Tough and durable

Optimum results

Types : 

Bend (Long & Short) 

Elbow (180 Deg., 90 Deg. & 45 Deg.) 

Tee (Equal & Unequal) 

Reducer (Concentric & Eccentric) 

CAP, Stub end (Long &Short) 

Nipple (Barrel)

Note: 

1. Rates are subject to change as per Daily market situation.

2. Rates given above are an approximate market rates and will be valid only after formal discussion and 100% payment in advance.

3. Payment 100% in advance by RTGS/NEFT.